CT series introduction: this chamber is suitable for the product (complete machine), parts, materials to perform high temperature test, low temperature test and high&low temperature cycling test. This chamber can be used for the tests of heat emission samples and non heat emission samples. For the test of heat emission samples, the cooling power can not exceed the refrigeration capacity of chamber, because the refrigeration capacity is a dynamic value, which will change with changeable temperature.
 
 
 
CT4 series technical parameters
 

Type			CT401PF	CT4025PF			CT405PF		CT41PF
Performance parameters	Temperature range		-40～＋150℃
	Temperature fluctuation		≤1℃（≤±0.5℃，according to GB/T5170-1996）
	Temperature uniformity		≤2℃
	Temperature deviation		±2℃
	Heating up time（room temperature→＋130℃）		≤60min		≤65min			≤65min	≤80min
	Cooling down time（room temperature→-40℃）		≤80min		≤75min			≤90min	≤80min
Structure	Shell		Cold-rolled steel plate with surface spray（ivory）
	Inner wall material		Stainless steel plate
	Thermal insulation material		Polyurethane foam
Refrigeration	Refrigerating method		Single stage compressor refrigeration mode（Air cooling*）
	Refrigerator		Imported compressor
Observation window（mm）			200×270			300×400		400×500
Test hole（mm）			one Φ50 at the left side			Two Φ100, one at the left and the other one at the right
Controller			Siemens PLC controller and Siemens color LCD touch screen.
Inner dimension (mm)		D	450		600			700	1020
		W	450		600			800	950
		H	580		700			900	1100
External dimension (mm)		D	1340		1470			1675	2015
		W*	892		800			1000	1150
		H	1540		1660			1860	2060
Overhead motor(mm)		H	180					235
Installed power（KW）			3.5		5			6	9.5
Power supply			AC380V 50Hz three phase four wire + ground wire
Weight approx.（Kg）			400		480			510	750
Standard accessory			2 product operation manuals. 1 test report, 1 certification, 1 quality certificate, 2 shelves and 4 racks with castors
Satisfy the standards			GJB 150.3、GJB 150.4、GB/T2423.1、GB/T2413.2

 
 
 
CT6 series technical parameters
 

Type			CT6003T		CT6025PF	CT605PF	CT61PF
Performance parameters	Temperature range			-60～＋130℃	-70～＋150℃
	Temperature fluctuation			≤1℃（≤±0.5℃，according to GB/T5170-1996）
	Temperature uniformity			≤2℃(≤100℃)	≤2℃
	Temperature deviation			±2℃(≤100℃)	±2℃
	Heating up time（room temperature～130℃)			≤50min	≤65min	≤80min	≤70min
	Cooling down time（room temperature～-60℃)			≤80min	≤80min	≤80min	≤80min
Structure	Shell			Cold-rolled steel plate with surface spray（ivory）
	Inner wall material			Stainless steel plate
	Thermal insulation material			Polyurethane foam
Refrigeration	Refrigerating method			Cascade compressor refrigeration mode（Air cooling*）
	Refrigerator			Imported compressor
Observation window（mm）				150×200	300×400	400×500
Test hole（mm）				oneΦ50 at the left side	two Φ100, one at the left and the other one at the right
Controller				Siemens PLC controller and Siemens color LCD touch screen.
Inner dimension (mm)		D		280	600	700	1020
		W		410	600	800	950
		H		300	700	900	1100
External dimension (mm)		D		595	1470	1675	2015
		W*		785	800	1000	1150
		H		995	1660	1860	2060
Overhead motor(mm)		H		100	180	235
Installed power（KW）				1.9	6	7.5	11
Power supply				AC220V 50HZ	AC380V 50Hz three phase four wire + ground wire
Weight approx.（Kg）				161	530	650	950
Standard accessory				1 product operation manual, 1 test report, 1 certification, 1 quality certificate, 2 shelves and 4 racks with castors
Satisfy the standards				GJB 150.3、GJB 150.4、GB/T2423.1、GB/T2423.2