Condensation test chamber
Introduction to condensation test chamber
Product Usage:
◆used for condensation test on surface paint film and other coatings to verify condensation will cause destructive effects;
◆used for product material test, such as foamed materials, to check whether condensation will cause destructive effects.
◆used to simulate the condensation situation of the automobile component group to evaluate the anti-condensation situation of automobile electronic component group.

Product prohibition:
u Test and storage of flammable, explosive and volatile substance samples.
u Test and storage of corrosive material samples.
u Test and storage of biological samples.
u Test and storage of strong electromagnetic emission source samples.
Detail parameters of condensation test chamber
type NLSY01F NLSY02F
Performance parameter Temperature range +5℃~+85℃ +5℃~+85℃
Temperature fluctuation ±0.5℃
Temperature deviation ±2℃
Relative humidity 100%RH (+0%,-5%,condensation process)
Heating time ≥10℃/30min(with load 20kg steel)
Cooling time ≥65℃/75min(with load 20kg steel)
Structure Shell Cold rolled steel plate electrostatic double-sided spray, the color is ivory
Liner SUS304 stainless steel
Thermal insulation material 100mm Non - hazardous waste environmental - friendly glass fiber insulation layer
Observation window(W×H) 400×500mm(1 piece) 400×500mm(2 pcs)
Test hole (mm) Two Φ100mm wire hole,with cover and soft plug,each one on the left and right side of test chamber
Internal dimension(mm) D 1000 1000
W 1000 2000
H 1000 Front 837,back 1050
Outline dimension(mm) D 2345 2090
W 1200 2250
H 2110(motor height excluded 240) 2080
Power Supply 380V±10%,50Hz±1 Three phase four wire + ground wire, Ω protection grounding resistance less than 4
Satisfy the standards DIN_EN_ISO_6270-2  Test Methods for condensate water climate
VW80000-2013 Medium condensation test
GS95011-4  BMW GS BMW 100 % humidity Standard - Dew test
Chongqing Yinhe Experimental Equipment CO.,LTD. 2012 渝ICP备09054543号 技术支持:Hansa
XML 地图 | Sitemap 地图